· The remote control distance of the Controller in the lighting control system using E/F2-BUS can be easily extended.
| Rated Input Voltage | 100 ~ 242Vac, 50/60Hz, 150mA |
| Power Consumption | 25W |
| Signal Current Consumption | ±24Vac, 10mA |
| Signal Output Capacity | ±24Vac, 500mA |
| I/O Signals | Non-polarized ±24V(E/F2-BUS) |
· CTU is a device that controls relays with 4 addresses.
· It receives signals from program switches, contact inputs, or PC control and controls the ON/OFF of directly connected relays.
· Unique addresses are assigned to connected relays through DIP switches.
| Rated Input Voltage | ±24Vac |
| Power Consumption | Non-polarized ±24V(E/F2-BUS) |
| Signal Current Consumption | 2.5mA |
| Output Control Points | 4 point |
| Address Setting | DIP switch |
· Rack Type Control T/U (CRC2180, RCTU-8) is a device that assigns addresses to and controls 8 ON/OFF relay control points, receiving signals from a Controller or program switch to turn directly connected relays ON/OFF.
· For installation convenience, it can be attached to and detached from Din-Rail or a dedicated mounting bracket (CRC9000).
| Rated Input Voltage | ±24Vac |
| Input Signal Voltage | Non-polarized ±24V(E/F2-BUS) |
| Signal Current Consumption | 2mA |
| Output Control Points | 8 point |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· The 10A HYBRID T/U has built-in 4 circuits of 10A relays and receives signals from switches, contact inputs, or PC control to control the ON/OFF of electrical loads.
※ Extends product lifespan by minimizing contact damage through blocking Inrush Current.
| Input Signal Voltage | Non-polarized ±24V(E/F2-BUS) |
| Signal Current | 4mA |
| Rated Output (Mains Voltage Side) | 10A, 277Vac X 4 Circuits |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· DCU is a 4-channel dimming control device that controls the brightness of 0-10VDC dimming standard lighting ballasts and LED converter-type fixtures (lighting).
· Standby power of lighting can be reduced by using On/Off control in conjunction with relay (CRC7000).
· For each dimming channel, maximum output (High-Trim) adjustment for energy savings and increased fixture maintenance factor, and minimum output (Low-Trim) adjustment for preventing flicker and trembling are possible.
| Signal Input Voltage | Non-polarized ±24V(E/F2-BUS) |
| Signal Current | 11mA |
| Output Channels | 4CH |
| Output Dimming Signal Voltage | 0-10Vdc(Pulling Down Type) X 4CH |
| 0–10V Dimming Signal Current | Max. 100 mA (+, -), 2-Wire (per channel) |
| Dimming Signal Wiring Distance | 100 m, 1.2 mm² (AWG 16 or larger) |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· DALI Protocol (IEC 62386)
· Controls up to 64 DALI devices
· 0.1%–100%, 254-step control
· Allows monitoring of individual DALI address and lamp status
| E/F2-BUS Signal | Non-polarized ±24V, 35mA |
| DALI Signal | 16V(±6.5V) |
| Non-polarized wiring / Compatible with external polarized DALI power | |
| Communication Speed | 1200bps |
| Maximum DALI Communication Distance | 300m, 1.5mm² (AWG 15 or larger) (distance until a 1.2 V voltage drop occurs) |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· CIT receives dry contact signals (up to 4 channels) from external devices and controls individual, group, scene, and dimming addresses for each channel.
· Each channel address can be set using the ASU (CRC6400).
· CH1 ~ CH4(4ch)
| Input Signal | Dry Contact Input, Open Collector |
Input Signal Voltage | Non-polarized ±24V(E/F2-BUS) |
| Signal Current Consumption | 6mA |
| Input Channels | 4CH |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· CIT-Tiny receives a 1-channel dry contact signal from an external device and controls individual, group, scene, and dimming addresses.
· Its ultra-compact design allows installation in various locations, providing excellent installation convenience.
· The address can be set using the ASU (CRC6400).
| Input Signal | Dry Contact Input, Open Collector |
| Input Signal Voltage | Non-polarized ±24V(E/F2-BUS) |
| Signal Current Consumption | 3.5mA |
| Input Channels | 1CH |
| Address Setting | Wireless Address Setting Device (CRC6400) |
· As a latching type relay, it receives control signals from CTU (CRC2000) and controls the ON/OFF of 30A lighting or other electrical loads at 100~347Vac
| Number of Poles | CRC7000-single-Pole |
| Rated Input Voltage (Low Voltage Side) | Voltage - ±24V |
| Current - 350mA | |
| Rated Output (AC Mains Side) | 30A, 347Vac(General Use) |
| 20A 300 Vac(Magnetic Ballast ) | |
| 16A 120/277 Vac(Electronic Ballast) | |
| Short Circuit Current Rating: 14,000A | |
· As a latching type relay, it receives control signals from CTU (CRC2000) and controls the ON/OFF of both L and N single-phase and 2-pole of 30A lighting or other electrical loads at 100~347Vac.
| Number of Poles | CRC7227-Double-Pole |
| Rated Input Voltage (Low Voltage Side) | Voltage - ±24V |
| Current - 700mA | |
| Rated Output (AC Mains Side) | 30A, 347Vac(General Use) |
| 16A 120/277 Vac (Electronic Ballast) | |
| 1 HP at 110-125 Vac | |
| 1-1/2 HP at 220-277 Vac |
· It is a portable terminal that can input control addresses and function settings of E/F2-BUS lighting control connection devices using infrared wireless communication without cable connection or use of specific software.
| Rated Load Capacity | 3Vdc(AA Cell X 2) |
| Continuous operation for more than 10 hours (using alkaline batteries) |
